Do-it-yourself wooden garden storage boxes are a simple means of storing seasonal and temporary items. Wooden storage boxes can be used in the garage, on the patio or in a storage shed to hide seasonal equipment, such as patio sets, pool equipment, bikes and machinery. While it is possible to buy a storage box at a hardware store, building a wooden one at home is a cheaper alternative as well as the box can be personalised and custom-built to fit into any space.
Measure the space where Plastic…Garden Storage Box – Garden Stuffs is going to be placed, and jot down the figures for your height, width and depth you will need the package to become. Draw the pieces necessary for the 4 sides from the box on the plywood sheets, using a pencil. You will want two side pieces measuring height by depth, and also the front and rear pieces should measure height by width. Cut out the 4 pieces with all the saw. Use the sandpaper to make the edges and surfaces smooth and splinter-free.
Arrange one of the side pieces so it is perpendicular to the front piece. Both pieces should be on end, as well as the end of the side piece needs to be covered by the surface side from the front piece. Quite simply, the side pieces will likely be attached in the back and front piece ends.
Attach the 2 pieces making use of the drill as well as at least four screws with the front piece. Attach the second side piece in the same way towards the opposite end of the front piece. Ensure the second side piece’s end is within the front piece. Last, attach the rear piece with all the drill and screws, so both ends of the side pieces are included in this last piece. You should now have a rectangular wooden frame.
Measure the rectangular frame’s perimeter. This will provide the measurements for the bottom and lid pieces. Write the measurements down. Transfer the measurements for the plywood, utilizing a pencil. Be sure they’re square, then cut them by helping cover their the saw and sandpaper both pieces.
Attach the base piece by lining it towards the wooden frame. Position the level on the box to guarantee the piece is level as well as. Attach it with screws placed every 6 inches, drilling the screws with the bottom piece and into comfou four sides. When done, turn it over, so you have an open box without a lid.
Attach two hinges towards the lid piece, screwing these to the underside of among the long sides. Flip the wooden garden storage box on its side to put in the lid properly. Line the lid as much as the package so that the hinges are inside the box and attach the hinges using screws as well as the screwdriver. Flip the wooden storage box right side up and close the lid.